(cherry picked from commit a1381d9146fba42cb97d72d38525fa3e721bfb03)
(cherry picked from commit 74714e0246)
(cherry picked from commit 7749dbfe66)
(cherry picked from commit 4379249711)
(cherry picked from commit a69f55bebf)
(cherry picked from commit 24dd5fbfdb)
(cherry picked from commit dda856d6b8)
(cherry picked from commit bc14f4fa97)
(cherry picked from commit 78fef4f137)
(cherry picked from commit 69e013cc51)
(cherry picked from commit f173c6a273)
(cherry picked from commit 92f9d02547)
(cherry picked from commit e1bbfa3619)
(cherry picked from commit 91245ca917)
(cherry picked from commit 705d0558be)
(cherry picked from commit 9247594970)
(cherry picked from commit 9db1158a48)
(cherry picked from commit 3b36b77d87)
(cherry picked from commit 162fa1d8ae)
(cherry picked from commit d03d0afbb5)
(cherry picked from commit 7b8f92f787)
(cherry picked from commit 035abca969)
(cherry picked from commit a8fbf6bb56)
(cherry picked from commit 3be681d037b07880236cae1aa70245e5eb4d1497)
(cherry picked from commit 7e5d471c83)
(cherry picked from commit 323801d935)
(cherry picked from commit 3fdfe4bfea)
(cherry picked from commit 58a07421a4)
(cherry picked from commit dbb71a4c85)
(cherry picked from commit d442113520)
(cherry picked from commit d3329f01f8)
(cherry picked from commit 069a1d68b8)
(cherry picked from commit 14919e609a)
(cherry picked from commit 49b76be106)
(cherry picked from commit 0fe9f257d2)
(cherry picked from commit 6d910daafb)
(cherry picked from commit d447861cc9)
(cherry picked from commit dc6e9d8799)
(cherry picked from commit ef232fa20c)
(cherry picked from commit 290c55517a)
(cherry picked from commit db48af1784)
(cherry picked from commit 85f33237a2)
(cherry picked from commit 76899ee33e)
(cherry picked from commit 148b3ee9cb)
(cherry picked from commit 1f6ad8f465)
(cherry picked from commit c330afdba3)
(cherry picked from commit b1f87075a7)
(cherry picked from commit 7da40992cc)
(cherry picked from commit 7ab19ff5e5)
(cherry picked from commit e61e44921b)
(cherry picked from commit 83646119fb)
(cherry picked from commit 20cf748e61)
(cherry picked from commit 0a99919cec)
(cherry picked from commit 21215222a6)
(cherry picked from commit 0f6c5658d7)
(cherry picked from commit 1752e43d3c)
(cherry picked from commit 2332080929)
(cherry picked from commit 590aabf2a2)
(cherry picked from commit 87d8b7b315c3e25bd3fcf9dc9c1d359bcd107281)
(cherry picked from commit ff37de38be)
(cherry picked from commit cee32c9e7a)
(cherry picked from commit 39faade524)
(cherry picked from commit 0e5ca477b6)
(cherry picked from commit 70e2730f7b)
(cherry picked from commit 2ad4003944)
(cherry picked from commit 2429de9e87)
(cherry picked from commit c133915fc1)
(cherry picked from commit c607dcaf9f)
(cherry picked from commit 00f006637f)
(cherry picked from commit 0de6646475)
Per the discussion on #22054, the flow for adding a new team member to
an org is not intuitive for new Gitea users.
The ideal solution would be to add a new button on the Org > Members
index view (see the screenshot mockup in the issue description).
However, this would require a refactor of the UX for the flow. The
current flow has an implicit context of which team within the org the
new member is being added to ('Owners' by default). From the Members
index, there is no implicit context; the flow would have to add a picker
for which team the new member should be added to.
So, as a stopgap, this change simply adds a button to the Teams index
page that performs the same action as clicking on the title of the team
(a behavior that is currently too obscure as indicated in the comments
on the issue). This should reduce support burden and serve as a decent
temporary measure until the Add Member flow is refactored.
---------
Co-authored-by: tomholford <tomholford@users.noreply.github.com>
The current language stats are too obsessed with color matching. Similar
colors are always next to each other. It is a bit troublesome to find
the place where the color matching is generated, so just follow the
example of github and add a gap.
## before
<img width="883" alt="image"
src="cf54430c-616c-4b37-b561-5a37c20b2d94">
## after
<img width="877" alt="image"
src="e518ea36-2b8f-4f11-a867-a58dc393db85">
Fixes: https://github.com/go-gitea/gitea/issues/27604
Add negative margins so the header covers any shadow of active elements.
No rendering change of the content of the header because the padding
counteracts the effect.
<img width="128" alt="image"
src="3d0f55b6-9351-4985-a290-da9a92d15b4e">
1. remove unused function `MoveIssueAcrossProjectBoards`
2. extract the project board condition into a function
3. use db.NoCondition instead of -1. (BTW, the usage of db.NoCondition
is too confusing. Is there any way to avoid that?)
4. remove the unnecessary comment since the ctx refactor is completed.
5. Change `b.ID != 0` to `b.ID > 0`. It's more intuitive but I think
they're the same since board ID can't be negative.
TODOs:
- [x] write test for `GetIssueTotalTrackedTime`
- [x] frontport kitharas template changes and make them mobile-friendly
---
---
*Sponsored by Kithara Software GmbH*
If you set a checkbox as required in a issue form at the moment, the
checkbox is checked and read only, what does not make much sense. With
this PR, the Checkbox actually needs to be checked. The label supports
now also Markdown. This matches GitHub's behaviour.
And yes, I know the CSS is a ugly workaround. It looks like the given
CSS code is part Fomantic and I don't know how to change that. The
Maintainers are free to change that.
See [issue on
gitea.com](https://gitea.com/gitea/gitea-docusaurus/issues/38), copied
below for convenience:
> Hello, may I first confirm that the app.ini PROTOCOL config is case
sensitive (must be lowercase)?
>
> If so, I'd like to suggest for it to be highlighted in the [HTTPS
Setup](https://docs.gitea.com/administration/https-setup#using-the-built-in-server)
page.
> Perhaps something like:
> For the PROTOCOL=https field, make sure https is lowercase. Writing
PROTOCOL=HTTPS may result in a SSL_ERROR_RX_RECORD_TOO_LONG error on
Firefox or ERR_SSL_PROTOCOL_ERROR on Chrome and Edge.
>
> Background
> At first I carelessly wrote PROTOCOL=HTTPS in my app.ini, and Firefox
didn't allow me to connect because:
> Secure Connection Failed
> An error occurred during a connection to gitea.local.lan. SSL received
a record that exceeded the maximum permissible length.
> Error code: SSL_ERROR_RX_RECORD_TOO_LONG
> I spent maybe half an hour troubleshooting my certs, ports, and other
configs before backtracking to the start and realizing the
capitalization difference there 😅. When I changed that config to
lowercase, it worked.
For this PR I added the note in the Config Cheat Sheet page and fixed
the links to it from the HTTPS Setup page.
Was originally thinking to put the note in the HTTPS Setup page itself,
but since there are 2 sections referencing the PROTOCOL config, I was
thinking it'd be neater and more concise to put it in the Config Cheat
Sheet page instead. Especially since both sections already link to it,
and I actually tried to check that link quite early on in my
troubleshooting (but didn't pay much attention to it since the link was
broken).
## Before/After screenshots as per [this repo's
docs](https://github.com/go-gitea/gitea/tree/main/docs)
Before - links
Note: For this the links weren't broken, the links fix is because they
were broken on gitea.com's docs (see below).
After - links
Before - config cheat sheet
After - config cheat sheet
## Before/After screenshots as per [gitea.com's
docs](https://gitea.com/gitea/gitea-docusaurus)
Before - links
After - links
Before - config cheat sheet
After - config cheat sheet
this allows to deep link to the readme section of a repository.
fixes#27641
Screenshots:
No changes on initial display:
On hover the link is shown:
1. Do not show temporary tooltips that are triggered from within
dropdowns. Previously this resulted in the tooltip being stuck to
top-left of the page like seen on issue comment URL copy. I could not
figure out any tippy options that prevent this, so I think it's better
to just not show it.
1. Refactor `initGlobalCopyToClipboardListener` so that it does not run
a often useless `document.querySelector` on every click, make
`data-clipboard-text-type` work with `data-clipboard-target`. No use in
current code base but still good to have. Finally some minor code
cleanup in the function.
Point 1 is for this copy button:
<img width="229" alt="image"
src="81f34746-8ea5-43d9-8c6f-f6f417a9e4ad">
---------
Co-authored-by: Giteabot <teabot@gitea.io>
When `webhook.PROXY_URL` has been set, the old code will check if the
proxy host is in `ALLOWED_HOST_LIST` or reject requests through the
proxy. It requires users to add the proxy host to `ALLOWED_HOST_LIST`.
However, it actually allows all requests to any port on the host, when
the proxy host is probably an internal address.
But things may be even worse. `ALLOWED_HOST_LIST` doesn't really work
when requests are sent to the allowed proxy, and the proxy could forward
them to any hosts.
This PR fixes it by:
- If the proxy has been set, always allow connectioins to the host and
port.
- Check `ALLOWED_HOST_LIST` before forwarding.
The ui of list header in milestone page is not same as issue and pr list
page.
And they are using different template codes which can be merged into
one.
Before:
After:
---------
Co-authored-by: puni9869 <80308335+puni9869@users.noreply.github.com>
